CAN Low Speed Fault Tolerant Physical Interface
The MC33388 is a CAN physical interface device, dedicated to automotive body electronic multiplexing applications. It operates in differential mode, allowing ground shifts up to 1.5V, reducing RFI disturbances. It offers very low standby current in sleep and standby mode operation, and supports communication speeds up to 125kBauds. It is fully protected against harsh automotive environments and the driver is able to detect fault conditions and automatically switches into appropriate default mode. Under fault condition, it continuously monitors bus failures in order to switch back to normal bus operation as soon as faults disappeared.
MC33388 Features
Dedicated to 12 V systems
Ambient temperature range from -40C to 125C.
Baud rate from 10 kBaud up to 125kBaud
Bus line short-circuit protected to battery, VDD and ground
Thermal protection of bus line drivers
Automatic switching to single wire mode in case of bus failures and reset to differential mode if bus failures are disappeared
Supports one wire transmission modes with ground offset up to 1.5V
Internal bus driver slope control function to minimize RFI
Bus line protected against transients in an automotive environment
Very low sleep/standby current (15mA)
Wake-up capability from bus and dedicated wake-up pin
Supports unshielded bus wires and up to 32 nodes
An unpowered node does not disturb the bus lines
Battery fail on NERR output
封装:SOIC14
MC33388DR2 CAN接口现货订购热线:
电话: 0755-8278 2277
手机: 13823737353
传真: 0755-83138727
Email:ryan#gongwin.com
QQ: (无需加为好友,直接点击即可询价)
(责任编辑:www.gongwin.com) |